Product Description
Small water heater, 10 to 15 liters, over sink, pressure tested
Tailored solutions for decentralized group supply. Over sink water heaters heat the water directly at the draw-off point. Energy and water losses due to long pipe runs are avoided. No circulation losses. Low energy losses thanks to high grade thermal insulation. Warm or hot water available at any time. Temperature controller with temperature sensor immersed directly in the water. Variable temperature selection from 35 °C - 85 °C via rotary selector. Temperature limit at 38 °C, 45 °C, 55 °C and 65 °C.
Product Specifications
SH 10 Sli
- Rated voltage 1: 220 V
- Rate output 1: 1.8 kW
- Rated current 1: 8.3 A
- Fuse 1: 10 A
- Rated voltage 2: 230 V
- Rated output 2: 2.0 kW
- Rated current 2: 8.7 A
- Fuse 2: 10A
- Rated voltage 3: 240 V
- Rated output 3: 2.2 kW
- Rated current 3: 9.1 A
- Fuse 3: 10 A
- Frequency: 50/60 Hz
- Rated Capacity: 10 liters
- Power supply: 1/N/PE
- Standby energy consumption/24 hours at 65 °C: 0.34 Kwh
- Color: White
- IP-Rating: IP24
- Energy efficiency class: A
- Weight: 8 kg
- Height x width x depth (mm): 503 x 295 x 275
SH 15 Sli
- Rated voltage 1: 220 V
- Rate output 1: 1.8 kW
- Rated current 1: 8.3 A
- Fuse 1: 10 A
- Rated voltage 2: 230 V
- Rated output 2: 2.0 kW
- Rated current 2: 8.7 A
- Fuse 2: 10A
- Rated voltage 3: 240 V
- Rated output 3: 2.2 kW
- Rated current 3: 9.1 A
- Fuse 3: 10 A
- Frequency: 50/60 Hz
- Rated Capacity: 15 liters
- Power supply: 1/N/PE
- Standby energy consumption/24 hours at 65 °C: 0.4 Kwh
- Color: White
- IP-Rating: IP24
- Energy efficiency class: A
- Weight: 10.5 kg
- Height x width x depth (mm): 601 x 316 x 295
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.