Before choosing your favourite floor, take a moment to get to know your space. A tape measure, a simple sketch and a few calculations are all you need for an initial estimate.
Step 1
Start with length and width
For a square or rectangular room, measure the length and width of the floor in feet. Multiply the two measurements to find the area in square feet.
12 ft × 10 ft = 120 sq ft
Floor area = Length × Width
Note: Measure every room separately and label your notes clearly. Keep all your measurements in the same unit.
Step 2
A different shape? Break it down
For an L-shaped or irregular room, draw a simple sketch and divide the floor into rectangles that do not overlap. Calculate each section, then add the areas together.
Total area: 144 sq ft
Section A: 12 ft × 10 ft = 120 sq ft Section
B: 6 ft × 4 ft = 24 sq ft
Note: Include alcoves, recesses and doorway areas where the new flooring will continue.
Step 3
Make room for the finishing cuts
Planks need to be cut around walls, corners and doorways. For an initial estimate, allow approximately 10% extra for cuts and wastage.
144 sq ft + 14.4 sq ft allowance
158.4 sq ft required
Note: Patterned or diagonal layouts and rooms with many corners may need more.
Step 4
Make room for the finishing cuts
Generally, don’t deduct small areas occupied by kitchen cabinets, columns or other small obstructions.
step 5
Send us your measurements
Send the measurements for each room. For irregular rooms, include a simple sketch with all measurements.
Bring your space one step closer.
Share your room measurements and sketches with the Evo Flooring team to review your estimated quantity and explore designs for your home.
Helpful tips
Measure every room separately and label them (e.g. Living Room, Bedroom 1, Bedroom 2).
Measure in feet and use a tape measure.
For diagonal layouts, complicated rooms, or many corners, you may need more than 10% extra.
Check for alcoves, doorways and built-in items, and include them in your measurements.